Basic Info.
Application
Commercial New
Specification
L4500*W1800*H1900
Product Description
Sanyi Quanfang Microbial Waste Disposer (2019-1000kg model)
Product Specifications and Parameters| Model No. | SF-2019-1000KG |
| Input Power | 220V 50HZ |
| Maximum Power | 1600W |
| Operation Mode | Periodic Movement |
| Control System | PLC + touch screen, intelligent processing system |
| Noise Level | 55db |
| Daily Processing Capacity | 1000KG |
| Net Weight | 3600kg |
| Applicable Environment | Indoor, For outdoor use under rain shed |
| Applicable Temperature | - 5C to 50C If the temperature is too low a heater must be installed |
| Dimensions | L4500*W1800*H1900 |
1. Please confirm whether the delivered machine model matches the one ordered by your company, check whether the machine and accessories are damaged or not during transportation.
2. Please install the equipment on a flat floor indoors. If you install it outdoors, you must build a rain-proof shed.
3. Pay keep necessary space between the equipment and the wall for easy inspection, maintenance and transportation.
4. The applicable ambient temperature of the equipment is -5ºC - 50ºC, lower than -5ºC, and the equipment needs to be heated. When the temperature is too low, the main processor cannot start normally.5. Power supply: 220V three-head socket (no socket smaller than 2.5mm² wire diameter should be used).
6. Connect the exhaust pipe and drain valve to the exhaust port and water outlet on the left side of the equipment and lock them tightly.3.2 Preparation for the first use 1. After placing the equipment in a suitable place with ventilation and power supply, take out the accessories inside.
2. Please insert the power plug into the socket, turn on the power to test the machine, press the start button and the device will start to run:
Check if there is an alarm on the display page(If any part is not running, the system will automatically alarm)
Check if there is wind from the exhaust vent.
Stop the machine after 5 minutes of testing.
3. Put in the original microorganisms:
Open the top feeding bin door: press and hold the door handle to unlock the door automatically upwards
Pour the original bacteria (approximately 20g) evenly into the bottom material of the sawdust in the mixing barrel
Pour about 10KG of water, close the warehouse door.
4. Start up and run for 6 hours to activate the microbial bacteria. The microbial bacteria need to be preheated for 6 hours before being activated and reach the best working condition when they are used for the first time, so they can be put into kitchen waste after 6 hours.3.3 Use method according to input
-Please observe the rated input amount of1000KG per day. Excessive input may cause product abnormalities, reduce decomposition effects, and produce foul odors;
-When there is a muddy or sticky shape in the mixing tank, it is an excessive input; at this time, the input of kitchen waste should be stopped for 2 to 3 days, and the inside of the mixing tank is dried before use.
-When disposing of kitchen waste with high water content, remove the water as much as possible before putting it in.
3.4 When the product is not in use
1. Do not use the management method for a short period of time. When not in use for a short period of time (traveling, business trip), there is no need to unplug the power supply. When the moisture content of the material in the barrel is too low, the product will automatically enter the energy-saving mode.
2. Do not use management methods for a long time
2.1 Stop putting garbage and let the machine run automatically to make the materials fully dry;
2.2 Cut off the power supply and clean the filter in the mixing tank;
2.3 This product can be treated as general garbage;
2.4 The internal microorganisms (by-products) can be used again, please keep them properly, and they can also be used as additives for organic fertilizers in small amounts. Chapter 4 Equipment Instructions 4.1 Food waste that can be thrown in and prohibited food waste
Troubleshooting and SolutionsCommon troubleshooting and inspection | Symptom | Inspection items | Solution |
| Machine does not start | Socket power on or not | Turn on the power |
| Plug loose or not | Plug in tightly |
| Not working after start (shaft do not spin) | 1.door is not close tightly 2.The chain is broken | 1.close the door tightly 2.Switch a new one |
| The machine is mixing overloaded | 1.waste inside is too much or not 2.Some waste stuck it or not | Get some food waste out in time |
| Motor is overloaded | Check the current setting up at motor protector right or wrong |
| UV lamp is abnormal | 1.The rectifier work or not 2.The lamp work or not | Contact the manufacturer for new pieces. |
| Heating is abnormal | 1.The heating film work or not 2.Temperature sensor work or not (warm or not inside) | Contact the manufacturer for new pieces. |
| The exhaust blower is abnormal | The blower is blocked or not | Clean it up |
| The blower work or not | Contact the manufacturer for new pieces. |
2This product has passed strict quality inspection.. In the event of a failure, if the problem cannot be solved according to the method in the manual, please unplug the power supply, stop using it, and contact the seller for after-sales service.3. During the warranty period, if there is a performance or function failure under normal use, the company is responsible for providing free repairs. The company will provide paid repairs when failures occur due to the following reasons: 1)Poor performance and machine failures occurred after the warranty period.
2) Machine failure caused by the user's intention or negligence. 3) Failures occurred due to repairs in the sales and service centers, or agents not designated by the company without authorization. 4) Failure caused by inconsistent power supply or poor quality of the power socket (irrespective of the warranty period). 5) Product failures or defects caused by natural disasters.4. If a malfunction occurs after the warranty period, please contact the seller for after-sales service.For more details please contact with us Product Detailsmicrobiological degradationBreaking through the traditional methods of garbage incineration and landfill, the eco-friendly kitchen waste disposer use high-tech micro-organisms to decompose the household waste, creating a precedent for the microbial decomposition of garbage. Efficient decomposition95%-98% of the food waste is decomposed, and the left 2% is converted into biological fertilizer, which achieves zero waste dischargeFirstly extract bio-digestants from the nature, then use our garbage disposal machine to decompose food waste into air, and organic fertilizer, finally back to nature. Organic fertilizer can be used for home gardening Safe and simplified operationPlug and play, no installation. Easy to operate with a safety shieldProduct ParametersDirect decomposition of microorganisms will not cause sewer blockage and odor after the use of garbage crusher.Prohibited item:Plastic Products, Metals, Pottery, Fuel, Organic Solvents, Bulk Wood, Bulk Animal Bones, Cloth.
Here are some frequently asked questions.1. How do your machines reduce food waste?The machines don't really reduce or eat the food waste, but the microorganisms inside of the machines do. These tiny microorganisms are working similar to microorganisms in our intestines. They cannot be seen by eyesight, but they do exist and work hard.2. Are the microorganisms safe?Yes, they are safe for sure. They do not cause disease, nor do they be harmful to draining systems. The microorganisms boost the population of beneficial bacteria in effect, and there would be beneficial effects in the system actually.3. Does the machine grind or chop the food waste?No, the machine does not grind or chop the food waste, but gradually digests the food waste into small pieces.4. What can I put into the machine?The machine is designed to process a wide range of food waste types like, fruit, vegetables, cooked and uncooked meat and poultry, fish, dairy, bakery items, etc.5. What CAN'T I put into the machine?The machine cannot process anything that is not food waste and cannot be easily broken down such as large bones, mussel and clam shells, pineapple tops, packaging, general waste or cutlery. Placing the wrong items into the machine could cause damage and could void the warranty.6. Can I put hot soups or frozen foods in the machine?No. Please make them to room temperature before adding. If very hot or very cold food waste is added, it could kill the microorganisms that breakdown the food waste.7. How long can the hatch door be open for?As short as you can. It is best to have your sorted food waste (out of all plastic and packaging) ready to be fed into the machine before opening the door. Long time opening will cause the core temperature of the machine to come down. The microorganisms thrive in a consistently warm environment. Over exposure to cold temperatures might kill the microorganisms.8. How often and how much can I feed my machine?Two to four times a day with normal quantity each time. The key to Sunefun machines' success is the balanced feeding. Like our stomachs, If we feed too much at once, it takes longer to digest. A balanced diet is the best way to allow Sunefun machine to be most effective.9. Why is there wood dust in the machine?The wood dust is the place where the microorganisms live. The wood media will be taken out some when the machine is nearly full, but don't worry; food waste fibers will fulfill the void place.10. How much water is consumed and discharged per day?No water is consumed and nearly no water discharged. The only discharging water is the water from steams, which is negligible.11. What is the warranty on the machine?Each machine comes with one year limited warranty.12. What can I do to keep the machine running at 100%?Keeping the machine fed and clean is the most important. Daily inspections and removal of any in-organic materials that may have accidentally been added to the machine is suggested.13. When should i get composted waste out?Get some out when it is nearly full. However, please keep half at least inside when you take the composted waste out.14. How long should i add the microorganisms?Every 6 months generally. If the digesting efficiency is still good, it can be longer, even more than a year.15.Are you manufacturer? Can you customized logo and packaging?Yes, we have our own factory. We accept customized orders, also we can develop new models for you.
Address:
1213, Bldg. 6, Shanglv Bldg., No. 381, East of Suzhou Road, Suzhou Industrial Park, Suzhou, Jiangsu, China
Business Type:
Manufacturer/Factory
Business Range:
Chemicals, Consumer Electronics, Industrial Equipment & Components, Manufacturing & Processing Machinery, Metallurgy, Mineral & Energy
Management System Certification:
ISO 9001, ISO 9000, ISO 14001, ISO 20000
Company Introduction:
Suzhou SunFun Electronics Co., Ltd. Was founded by a senior designer and was established on June 10, 2004, originally known as Suzhou Shenxin Precision Machine Factory, and Suzhou Huahe Sport Products Co., Ltd. In 2015, It was renamed Suzhou SunFun Electronics Co., Ltd, With a total investment of 6.5 million USD, it focuses on developing environmental products. It is the first enterprise to research and produce bio-waste processor technology in China. Through several years of design and development, there are various models of household bio-waste processors and commercial bio-waste processors, zero-emission biological toilets, grinding-type household waste disposer and intelligent air purifier products.
){kind=link}